(1) Please use A4 size papers.
(2) Please use the SPICE model in page 3 for simulation and calculation.
1. [Common-Source with Diode-Connected Load]
(a) Assume λ = 0 and γ = 0. For VDD = 5 V, VIN = 0.9 V,
(Wdrawn/Ldrawn)2 = 5 µm / 2 µm and (Wdrawn/Ldrawn)1 = x µm / 2 µm, what is the value of x to obtain a voltage gain Av = –5? What is the range of VIN for M1 to stay in the saturation region?
(b) Using the design and biasing condition in (a), plot VOUT as a function of VIN (from 0 V to 5 V) in Pspice. Compare the hand-
calculation results in (a) with the simulation results here. Note: the slope of the VOUT versus VIN curve at VIN = 0.9 V is the Av.
(c) Using the design and biasing conditions in (a), plot Vout as a function of time (from 0 to 0.1 second) in Pspice, when Vin = 0.9 + 0.001 × sin(2π100t) (V). Compare the hand-calculation results in (a) with the simulation results here. Note: the small-signal voltage amplitude of Vout divided by the small-signal voltage amplitude of Vin is the Av.
2. [Common-Source with Source Degradation]
(a) Assume λ = 0 and γ = 0. For VDD = 5 V, VIN = 1.2 V,
(Wdrawn/Ldrawn)1 = 200 µm / 2 µm, RD = 100 kΩ and RS = 20 kΩ, what is the voltage gain Av? Does the voltage gain approach –RD / RS as expected? (b) [10%] Using the design and biasing condition in (a), plot VOUT as a function of VIN (from 0 V to 5 V) in Pspice. Compare the hand-
calculation results in (a) with the simulation results here. Note: the slope of the VOUT versus VIN curve at VIN = 1.2 V is the Av.
(c) Using the design and biasing conditions in (a), plot Vout as a function of time (from 0 to 0.1 second) in Pspice, when Vin = 1.2 + 0.001 × sin(2π100t) (V). Compare the hand-calculation results in (a) with the simulation results here. Note: the small-signal voltage amplitude of Vout divided by the small-signal voltage amplitude of Vin is the Av.
Vacuum permittivity (𝛜𝐨) = 𝟖. 𝟖𝟓 × 𝟏𝟎−𝟏𝟐 (F / m) Silicon oxide dielectric constant (𝛜𝐫) = 𝟑. 𝟗
