Java-OOP Homework 2 - Sequences Solution

Problem Description
After completing the introductory homeworks, you should have a good idea of how to create and manipulate variables, how to perform calculations and output those results, and finally, how to accept and include user input in your calculations and results. This assignment will focusing on control flow, specifically conditionals and loops. To brush up on these concepts, check out the links below:
• conditionals
• while loops
• for loops
You will create a program, NumberSequences.java, that will allow a user to generate a few sequences of numbers following a given rule (or rules)!
Make sure you read the entire document! There are some things even at the very end that you will not want to miss for this and future assignments!
Defining a Sequence
A sequence is a series of numbers that follow a pattern or property. For example, the sequence of even numbers less than 10 is: 2, 4, 6, and 8.
Here, every number is less than 10, and every number is even.
Solution Description
For NumberSequences.java, you will have two sequences to implement:
• the Collatz sequence.
• the Fibonacci sequence.
The user will be prompted to first select one of these sequences to view. They will then provide an integer parameter in order to compute the appropriate sequence. The instructions below will first outline the sequences, then explain flow of the program.
The Collatz Sequence
Given some starting integer, which we’ll call startNum, it is always possible to arrive at 1 by repeating the following operations in sequence:
• if the number is even, divide the number by 2.
• if the number is odd, multiply the number by 3, and add 1.
For example, if my starting number were 5, then my sequence would be:
Collatz Sequence: 5 16 8 4 2 1
Note that startNum can be any number from 1 to 100, both ends inclusive. We also want you to display the the number of steps from startNum to the final number, 1. So, in the case of startNum = 5, you can see there are 5 steps (count the spaces in between the numbers).
The user should be prompted to enter the starting number, and the results should be displayed as formatted below:
Enter the starting number (1 - 100): 3
Collatz Sequence: 3 10 5 16 8 4 2 1
Number of steps: 7
In short, given a starting number you should:
• generate the Collatz Sequence beginning with that number.
• give the amount of steps it takes to get to 1 (i.e. terminate the sequence).
The Fibonacci Sequence
Given the initial Fibonacci numbers 0 and 1, we can generate the next number by adding the two previous Fibonacci numbers together. For this sequence, you will be asked to take an input, denoting how many Fibonacci numbers you want to generate. Call this input upperFibLimit. The longest Fib sequence you should generate is 40 and the shortest you should generate is 1. So, 1 <= upperFibLimit <= 40. The rule is simple - given f(0) = 0, f(1) = 1:
• f(n) = f(n - 2) + f(n - 1)
Where n is the index of the Fibonacci number in the sequence. All you have to do is generate the sequence.
Think about the initial numbers, and what you have to do to get the next number.
Note: The Fibonacci sequence is commonly generated using recursion. Do not do this! The sequence must be generated iteratively! That is, you must generate the sequence using only while, do-while, for, or for-each loops!
The user should be prompted for the length of the sequence to generate, and then the sequence should be displayed as follows:
Enter the length of the desired fib sequence (1 - 40): 8
Fib Sequence: 0 1 1 2 3 5 8 13
Control Flow of the Program
Your program should prompt the user to input which sequence they want to view. The user will then be prompted to input a number specific to that sequence, which will then be used to calculate and display the specific sequence. After computing any given sequence, the user will be brought back to the first prompt, where the process starts all over again. The user can input E to exit the program at the main prompt. “E” is only valid when prompted with the following: Enter the first character of the sequence to generate...
Here is a full example of all the major parts of the UI:
$ java NumberSequences
Enter the first character of the sequence to generate
(C)ollatz, (F)ib, or (E)xit: C
Enter the starting number (1 - 100): 3
Collatz Sequence: 3 10 5 16 8 4 2 1
Number of steps: 7
--------------------
Enter the first character of the sequence to generate
(C)ollatz, (F)ib, or (E)xit: F Enter the length of the desired fib sequence (1 - 40): 8
Fib Sequence: 0 1 1 2 3 5 8 13
-------------------Enter the first character of the sequence to generate
(C)ollatz, (F)ib, or (E)xit: E --------------------
$
MAKE SURE YOU FOLLOW FORMATTING EXACTLY (spaces, newlines, dashes, ...).
Note the -’s separating each iteration of our program, these need to be printed in the indicated formatting
(there are 20 per line). Additionally, note that the responses to the prompts are user input and not output from the program.
Scanner Usage
Using multiple Scanners on System.in is bad style and leads to bugs. As such, only use a single Scanner, and don’t declare or assign it within a loop or conditional statment. The autograder will fail if you do not follow this instruction.
Valid (and Invalid) Inputs
Allowed Imports
To prevent trivialization of the assignment, you are only allowed to import the following classes:
• java.util.Scanner
If you would like to import anything else, ask on Piazza.
Feature Restrictions
There are a few features and methods in Java that overly simplify the concepts we are trying to teach. For that reason, do not use any of the following in your final submission:
• var (the reserved keyword)
• System.arraycopy
• System.exit
Checkstyle
You must run checkstyle on your submission. The checkstyle cap for this assignment is 5 points. Review the style guide and download the checkstyle jar. Run checkstyle on your code like so:
$ java -jar checkstyle-6.2.2.jar *.java Audit done. Errors (potential points off):
0
The message above means there were no Checkstyle errors. If you had any errors, they would show up above this message, and the number at the end would be the points we would take off (limited by the checkstyle cap mentioned above). Any Java source files we provide contain no Checkstyle errors. In future homeworks we will be increasing this cap, so get into the habit of fixing these style errors early!
Depending on your editor, you might be able to change some settings to make it easier to write style-compliant code. See the customization tips page for more information.
Rubric
[100] NumberSequences.java
• [5] Exit command ‘E’ successfully terminates program
• [5] Program uses a single Scanner and loops until user enters ‘E’ • [40] Collatz
– [5] Correct input prompt format
– [10] Correct output format
– [10] Correct sequence and steps for basic case
– [15] Correct sequence and steps for all cases
• [40] Fib
– [5] Correct input prompt format
– [10] Correct output format
– [10] Correct sequence for basic case
– [15] Correct sequence for all cases
• [10] Correctly generates multiple sequences in a row
We reserve the right to adjust the rubric, but this is typically only done for correcting mistakes.
Collaboration
Collaboration Statement
I worked on the homework assignment alone, using only course materials.
or
In order to help learn course concepts, I worked on the homework with [give the names of the people you worked with], discussed homework topics and issues with [provide names of people], and/or consulted related material that can be found at [cite any other materials not provided as course materials for CS 1331 that assisted your learning].
Allowed Collaboration
• What general strategies or algorithms you used to solve problems in the homeworks
• Parts of the homework you are unsure of and need more explanation
• Online resources that helped you find a solution
• Key course concepts and Java language features used in your solution
Turn-In Procedure
Submission
To submit, upload the files listed below to the corresponding assignment on Gradescope:
• NumberSequences.java
Make sure you see the message stating “HW## submitted successfully”. From this point, Gradescope will run a basic autograder on your submission as discussed in the next section.
Gradescope Autograder
For each submission, you will be able to see the results of a few basic test cases on your code. Each test typically corresponds to a rubric item, and the score returned represents the performance of your code on those rubric items only. If you fail a test, you can look at the output to determine what went wrong and resubmit once you have fixed the issue.
The Gradescope tests serve two main purposes:
1) Prevent upload mistakes (e.g. forgetting checkstyle, non-compiling code)
2) Provide basic formatting and usage validation
In other words, the test cases on Gradescope are by no means comprehensive. Be sure to thoroughly test your code by considering edge cases and writing your own test files. You also should avoid using Gradescope to compile, run, or checkstyle your code; you can do that locally on your machine.
Important Notes (Don’t Skip)
• Non-compiling files will receive a 0 for all associated rubric items
• Test your code in addition to the basic checks on Gradescope
• Submit every file each time you resubmit
• Ensure you pass all “FORMAT:” tests
• Read the “Allowed Imports” and “Restricted Features” to avoid losing points
• Check on Piazza for a note containing all official clarifications
• Only use a single Scanner, and don’t declare or assign it within a loop
• Do not use System.exit. It will break the autograder, causing you to get a 0