CS3600-2 Project 3- Ghostbusters Solution

GHOSTBUSTERS
I can hear you, ghost.
Running won't save you from my
Particle filter!
Introduction
Pacman spends his life running from ghosts, but things were not always so. Legend has it that many years ago, Pacman's great grandfather Grandpac learned to hunt ghosts for sport. However, he was blinded by his power and could only track ghosts by their banging and clanging.
In this project, you will design Pacman agents that use sensors to locate and eat invisible ghosts. You'll advance from locating single, stationary ghosts to hunting packs of multiple moving ghosts with ruthless efficiency.
The code for this project contains the following files.
Files you will edit
bustersAgents.py Agents for playing the Ghostbusters variant of Pacman. inference.py Code for tracking ghosts over time using their sounds.
Files you will not edit
busters.py The main entry to Ghostbusters (replacing Pacman.py)
bustersGhostAgents.py New ghost agents for Ghostbusters
distanceCalculator.py Computes maze distances
game.py Inner workings and helper classes for Pacman
ghostAgents.py Agents to control ghosts
graphicsDisplay.py Graphics for Pacman
graphicsUtils.py Support for Pacman graphics
keyboardAgents.py Keyboard interfaces to control Pacman
layout.py Code for reading layout files and storing their contents
util.py Utility functions
Files to Edit and Submit: You will fill in portions of inference.py and bustersAgents.py during the assignment. You should submit these files with your code and comments in .zip or .tar.gz files. Please do not change the other files in this distribution or submit any of our original files other than these files.
Evaluation: Your code will be autograded for technical correctness, using the same autograder and test cases you are provided with. Please do not change the names of any provided functions or classes within the code, or you will wreak havoc on the autograder. You should ensure your code passes all the test cases before submitting the solution, as we will not give any points for any questions if not all the test cases for it pass. However, the correctness of your implementation -- not the autograder's judgements -- will be the final judge of your score. Even if your code passes the autograder, we reserve the right to check it for mistakes in implementation, though this should only be a problem if your code takes too long or you disregarded announcements regarding the project.
Discussion: Please be careful not to post spoilers.
Ghostbusters and BNs
In the Pacman version of Ghostbusters, the goal is to hunt down scared but invisible ghosts. Pacman, ever resourceful, is equipped with sonar (ears) that provides noisy readings of the Manhattan distance to each ghost. The game ends when Pacman has eaten all the ghosts. To start, try playing a game yourself using the keyboard.
python busters.py
The blocks of color indicate where the each ghost could possibly be, given the noisy distance readings provided to Pacman. The noisy distances at the bottom of the display are always non-negative, and always within 7 of the true distance. The probability of a distance reading decreases exponentially with its difference from the true distance.
Your primary task in this project is to implement inference to track the ghosts. For the keyboard based game above, a crude form of inference was implemented for you by default: all squares in which a ghost could possibly be are shaded by the color of the ghost. Naturally, we want a better estimate of the ghost's position. Fortunately, Bayes' Nets provide us with powerful tools for making the most of the information we have.
Throughout the rest of this project, you will implement algorithms for performing both exact and approximate inference using Bayes' Nets. The lab is challenging, so we do encouarge you to start early and seek help when necessary.
While watching and debugging your code with the autograder, it will be helpful to have some understanding of what the autograder is doing. There are 2 types of tests in this project, as differentiated by their *.test files found in the subdirectories of the test_cases folder. For tests of class DoubleInferenceAgentTest, your will see visualizations of the inference distributions generated by your code, but all Pacman actions will be preselected according to the actions of the staff implementation. This is necessary in order to allow comparision of your distributions with the staff's distributions. The second type of test is GameScoreTest, in which your BustersAgent will actually select actions for Pacman and you will watch your Pacman play and win games.
python autograder.py -t test_cases/q1/1-ExactUpdate
In general, all test cases can be found inside test_cases/q*.
DiscreteDistribution Class
Throughout this project, we will be using the DiscreteDistribution class defined in inference.py to model belief distributions and weight distributions. This class is an extension of the built-in Python dictionary class, where the keys are the different discrete elements of our distribution, and the corresponding values are proportional to the belief or weight that the distribution assigns that element. Take a look at the normalize, sample, and total functions that have been provided.
Question 1 (3 points): Exact Inference Observation
In this question, you will update the observeUpdate method in ExactInference class of inference.py to correctly update the agent's belief distribution over ghost positions given an observation from Pacman's sensors. A correct implementation should also handle one special case: when a ghost is eaten, you should place that ghost in its prison cell, as described in the comments of observe.
To run the autograder for this question and visualize the output:
python autograder.py -q q1
As you watch the test cases, be sure that you understand how the squares converge to their final coloring. In test cases where is Pacman boxed in (which is to say, he is unable to change his observation point), why does Pacman sometimes have trouble finding the exact location of the ghost?
Hints:
You are implementing the online belief update for observing new evidence. Before any readings, Pacman believes the ghost could be anywhere: a uniform prior (see initializeUniformly). After receiving a reading, the observeUpdate function is called, which must update the belief at every position.
Before typing any code, write down the equation of the inference problem you are trying to solve.
You should use the function self.getObservationProb which returns the probability of an observation given Pacman’s position, a potential ghost position, and the jail position. You can obtain Pacman’s position using gameState.getPacmanPosition(), and the jail position using self.getJailPosition()
In the Pacman display, high posterior beliefs are represented by bright colors, while low beliefs are represented by dim colors. You should start with a large cloud of belief that shrinks over time as more evidence accumulates.
Beliefs are stored as util.Counter objects (like dictionaries) in a field called self.beliefs, which you should update.
You should not need to store any evidence. The only thing you need to store in ExactInference is self.beliefs.
Question 2 (4 points): Exact Inference with Time Elapse
In this question, you will implement the elapseTime method in ExactInference. Your agent has access to the action distribution for any GhostAgent. In order to test your elapseTime implementation separately from your observe implementation in the previous question, this question will not make use of your observe implementation.
Since Pacman is not utilizing any observations about the ghost, this means that Pacman will start with a uniform distribution over all spaces, and then update his beliefs according to how he knows the Ghost is able to move. Since Pacman is not observing the ghost, this means the ghost's actions will not impact Pacman's beliefs. Over time, Pacman's beliefs will come to reflect places on the board where he believes ghosts are most likely to be given the geometry of the board and what Pacman already knows about their valid movements.
For the tests in this question we will sometimes use a ghost with random movements and other times we will use the GoSouthGhost. This ghost tends to move south so over time, and without any observations, Pacman's belief distribution should begin to focus around the bottom of the board. To see which ghost is used for each test case you can look in the .test files.
To run the autograder for this question and visualize the output:
python autograder.py -q q2
As you watch the autograder output, remember that lighter squares indicate that pacman believes a ghost is more likely to occupy that location, and darker squares indicate a ghost is less likely to occupy that location. For which of the test cases do you notice differences emerging in the shading of the squares? Can you explain why some squares get lighter and some squares get darker?
Hints:
Instructions for obtaining a distribution over where a ghost will go next, given its current position and the gameState, appears in the comments of ExactInference.elapseTime in inference.py.
We assume that ghosts still move independently of one another, so while you can develop all of your code for one ghost at a time, adding multiple ghosts should still work correctly.
Question 3 (3 points): Exact Inference Full Test
Now that Pacman knows how to use both his prior knowledge and his observations when figuring out where a ghost is, he is ready to hunt down ghosts on his own. This question will use your observe and elapseTime implementations together, along with a simple greedy hunting strategy which you will implement for this question. In the simple greedy strategy, Pacman assumes that each ghost is in its most likely position according to its beliefs, then moves toward the closest ghost. Up to this point, Pacman has moved by randomly selecting a valid action.
Implement the chooseAction method in GreedyBustersAgent in bustersAgents.py. Your agent should first find the most likely position of each remaining (uncaptured) ghost, then choose an action that minimizes the distance to the closest ghost. If correctly implemented, your agent should win the game in q3/3-gameScoreTest with a score greater than 700 at least 8 out of 10 times. Note: the autograder will also check the correctness of your inference directly, but the outcome of games is a reasonable sanity check.
To run the autograder for this question and visualize the output:
python autograder.py -q q3
Note: If you want to run this test (or any of the other tests) without graphics you can add the following flag:
python autograder.py -q q3 --no-graphics
Hints:
When correctly implemented, your agent will thrash around a bit in order to capture a ghost.
The comments of chooseAction provide you with useful method calls for computing maze distance and successor positions. Make sure to only consider the living ghosts, as described in the comments.
Question 4 (3 points): Approximate Inference Observation
Approximate inference is very trendy among ghost hunters this season. Next, you will implement a particle filtering algorithm for tracking a single ghost.
Implement the functions initializeUniformly, getBeliefDistribution, and observeUpdate for the ParticleFilter class in inference.py. A particle (sample) is a ghost position in this inference problem. Note that, for initialization, particles should be evenly (not randomly) distributed across legal positions in order to ensure a uniform prior.
A correct implementation should also handle the following special case. (1) When all your particles receive zero weight based on the evidence, you should resample all particles from the prior to recover. When complete, you should be able to track ghosts nearly as effectively as with exact inference.
Note that the variable you store your particles in must be a list. A list is simply a collection of unweighted variables (positions in this case). Storing your particles as any other data type, such as a dictionary, is incorrect and will produce errors. The getBeliefDistribution method then takes the list of particles and converts it into a DiscreteDistribution object.
To run the autograder for this question and visualize the output:
python autograder.py -q q4
Hints:
The belief cloud generated by a particle filter will look noisy compared to the one for exact inference.
Question 5 (4 points): Approximate Inference with Time Elapse
Implement the elapseTime function for the ParticleFilter class in inference.py. his function should construct a new list of particles that corresponds to each existing particle in self.particles advancing a time step, and then assign this new list back to self.particles. When complete, you should be able to track ghosts nearly as effectively as with exact inference.
Note that in this question, we will test both the elapseTime function in isolation, as well as the full implementation of the particle filter combining elapseTime and observe.
To run the autograder for this question and visualize the output:
python autograder.py -q q5
Extra Credit: Question 6 (4 points): Joint Particle Filter Observation
So far, we have tracked each ghost independently, which works fine for the default RandomGhost or more advanced DirectionalGhost. However, the prized DispersingGhost chooses actions that avoid other ghosts. Since the ghosts' transition models are no longer independent, all ghosts must be tracked jointly in a dynamic Bayes net!
The Bayes net has the following structure, where the hidden variables G represent ghost positions and the emission variables E are the noisy distances to each ghost. This structure can be extended to more ghosts, but only two (a and b) are shown below.

You will now implement a particle filter that tracks multiple ghosts simultaneously. Each particle will represent a tuple of ghost positions that is a sample of where all the ghosts are at the present time. The code is already set up to extract marginal distributions about each ghost from the joint inference algorithm you will create, so that belief clouds about individual ghosts can be displayed.
Complete the initializeParticles, getBeliefDistribution, and observeUpdate method in JointParticleFilter to weight and
Read the comments in the function for useful hints
You should now effectively track dispersing ghosts. To run the autograder for this question and visualize the output:
python autograder.py -q q6
Extra Credit: Question 7 (4 points): Joint Particle Filter with Elapse Time
Complete the elapseTime method in JointParticleFilter in inference.py to resample each particle correctly for the Bayes net. In particular, each ghost should draw a new position conditioned on the positions of all the ghosts at the previous time step. The comments in the method provide instructions for support functions to help with sampling and creating the correct distribution.
Note that completing this question involves removing the call to util.raiseNotDefined(). This means that the autograder will now grade both question 6 and question 7. Since these questions involve joint distributions, they require more computational power (and time) to grade, so please be patient!
As you run the autograder note that q7/1-JointParticlePredict and q7/2-JointParticlePredict test your elapseTime implementations only, and q7/3-JointParticleFull tests both your elapseTime and observe implementations. Notice the difference between test 1 and test 3. In both tests, pacman knows that the ghosts will move to the sides of the gameboard. What is different between the tests, and why?

To run the autograder for this question use:
python autograder.py -q q7
Congratulations! Only one more project left.
Submission